Announcing the new BATCAM III housing, for the serious divers:
The new housing sample is going through a horror August from Trygons " Crash Test Divers"! It is estimated to be available from 15nth of September. AIDA Hellas is already the first to use it for the national competition in Lutraki 27nth Sept...
"action emotions" video
... enjoy ...
After many years of development the Trygons boat is finally ready!
More pictures and comments can be seen at http://www.facebook.com/trygons
περισσοτερες πληροφοριες/φωτογραφιες στο http://www.facebook.com/trygons
6/2010, the new series of spearguns is launched. Model “Τrygons R2” has replaced “Τrygons dmfr” and series “Τrygons RX” is the new entry.
Although, from a distance, the new series looks the same with the previous “dmf” and “dmfr” series, “R2” and “RX” are made from new molds and with improved technology.
The principle remains the same: Minimizing energy losses and not wasting a gram of possible power.
The innovations are:
1) High density carbon fiber composite is present inside the handle, enclosed track and head part. Also, the reel housing is now 4mm thick. These 2 new features increase the guns' overall stiffness and make it very enduring to accidents.
2) The track is machined and checked for straightness by a dedicated heavy duty automated cnc slide. As a result, Trygons now offers 0,01milimeters track straightness accuracy! It seems exaggerated but in some cases we had 25% increase in power output just by that feature. Also, we now offer dedicated enclosed tracks for all diameters, from 6,3 milimeters up to 10 millimeters.
3) The barrel now has 40% more unidirectional carbon fibers. “RX” Series, has an even harder type of unidirectional carbon fibers, twice as hard. As a result, our new models can sustain more loading force than before, with negligible barrel bending. Every gun gets a stiffness measurement before shipment, as a quality test. For those who like “speargun tweaking”, series “RX”, now offers stability even up to 5X19mm at 3,2ratio loading ! But, be very careful, since the gun can take it, but human bone and joints can't take that level of backslash. Our suggestion is that tests are done on a fixing base instead of manually.
4) New resins are used, able to stay stable to temperatures up to 90οC (194F). Same resins that are approved for aviation and wind energy blades construction.
Series “RX”, follows a 2 days in-mold, curing program. Finally, guns of this series remain for 4 hours at 100oC (212F) temperature. Thus, we can guarantee that it will never suffer under the sun.
5) In our new, bigger, testing tank we made a dedicated workbench facility for speargun development. Thus, we now can prove that we produce “ the most powerful and accurate spearguns ever”. Of course any challenge is accepted!
6) The trigger mechanism has drastically been improved. Now, it can function nicely with up to 400kgr load (8 bands equivalent!), without even getting a hard trigger. Secondly, a worm screw was added at the top of the deck. This screw is to trim the mechanism onto any new spear used. Now, you can get the full benefit of the super straight Trygons track*.
*Without that ability the spear tends to lift from the track when loaded. As a result, directly after shooting, the spear does a radical vertical hit to the track. This hit was affecting accuracy and power.
7) All drills and cuts for the mechanism, reel and front end are now done by automated cnc machine. Because of our new high accuracy track, we needed the same tolerance for the rest of the gun. But this is no more possible by hand tools, so a big automated cnc setup was utilized.
8) The barrel is now filled partially with heavy-duty submarine foam. Now, in combination with the rounded barrel, the gun remains unaffected from pressure. It was noticed that many carbon fiber guns, especially flattened types, would bend in high depths.
9) For achieving more even force distribution, the barrel is made without seems. It is made from one-piece fabric, reverse layer from the outside to the inside! The whole process is one of Trygons manufacturing secrets.
10) There are 2 types of shapes available:
a) The normal barrel, has a lower volume and is most appropriate for thinner shafts up to 6.75mm. It turns faster and has a more silent shot.
b) The “HB” (heavy barrel) type that has a maximized volume, so as to stiffen the barrel and take the backslash. This type is intended for heavy shafts >7mm and lots of bands. Its purpose is maximum penetration power!
11) Water ballast is now standard in all models! On one side, you have a lighter gun to travel around. On the other side, the gun has a water chamber that fills up and makes the gun neutral buoyant. The mass of this water is added to the mass of the gun, absorbing backslash, thus increasing power. Also, there is a ready fixing feature for our new housing! Within seconds you can add a video feature to your gun. Have a look at what our "little 90" can do and get an idea of whats possible withTrygons at http://www.youtube.com/watch?v=bkYsxyhej0o
1) Automatic release, integrated & non stuck reel.
2) Centered rubbers, for uniform force distribution.
3) Cad/FEA** analyzed hydrodynamic shape, for easy swimming and deep spearfishing. There are divers that freedive down to 50+ meters with 120+ length Trygons spearguns! And not only Herbert. Also, very important, the front half part of all models is also designed so as to minimize drag in both horizontal (rock hunting) and vertical axes (open or blue water hunting).
**A dedicated software predicts drag of the gun and makes alterations for improvement. At the same time, it takes into account turn drag but also pressure results to the barrel! The entire process takes a number of days to get a result.
4) Front end weights pockets for adjusting buoyancy to personal needs. Of course, all guns are balanced by Trygons.
Trygons gives 6years warranty for series R2 and lifetime warranty for RX. Also, both series (as also previous dmf and dmfR series) , can have their enclosed tracks refiled and re-straightened. Meaning that even a 10 year old gun can be shooting 100% like the first day!
90-130 cm spear - 6 or 6.3mm- 700 euros
100-140cm spear - 6.75mm- 810 euros
100HB- 140cm spear - 7.2 or 8mm- 880 euros
110- 150cm spear - 6.75 or 7.2mm- 880 euros
120- 160cm spear - 6.75 or 7.2mm- 920 euros
130HB- 170cm spear - 7.2 or 8mm- 1050 euros
140HB- 180cm spear - 8mm- 1120euros
Prices do not include bands and spear. Other track diameters after request. Delivery time is up to 6 weeks.
120- 160cm spear - 6.75 or 7.2mm - 1300 euros
130HB- 170cm spear - 7.2 or 8mm- 1350 euros
140HB- 180cm spear - 8mm - 1400 euros
Prices do not include bands and spear. Other track diameters or models after request. Delivery time is up to 8 weeks.